Sopho K systems are supported with the system-phones listed below. The prices indicated are for fully refurbished grade A system-phones, tested and supply with new curly cord and line cord.
| Sopho K160 (£55.00 ex. vat) has four function buttons: Hold, Transmit, Program and Recall. It is wall mountable, has a keypad memory of 10 external numbers and a sounder volume and pitch control. ** SORRY BY WE'RE OUT OF SOPHO-K STOCK ** | £55.00 ex. vat (Fully refurbished) |
| Sopho K 260 (£65.00) has all the features of the K160 plus 8 facility buttons with LEDs, allowing two levels of programming. Three of these buttons have fixed facilities: Monitor, Do not Disturb, External Sounder On / Off. ** SORRY BY WE'RE OUT OF SOPHO-K STOCK ** | £65.00 ex. vat (Fully refurbished) |
| Sopho-Set K 261has all the features of the K 260 but has and additional 8 (total 16) facility buttons. ** SORRY BY WE'RE OUT OF SOPHO-K STOCK ** | £80.00 ex. vat (Fully refurbished) |
| Sopho-Set K365 has all the features of the K 261 plus a 16 digit, Alpha-numeric, Liquid Crystal Display, allows hands-free speech, and allows 13 different preset messages to be sent to other K365 users. ** SORRY BY WE'RE OUT OF SOPHO-K STOCK ** | £105.00 ex. vat (Fully refurbished) |
Sopho-K spare control units | PRICE | | K-308 CONTROL UNIT - Refurbished | £150.00 | | K-512 CONTROL UNIT-Refurbished | £200.00 | | K-12 (Earlier release than K 512)- Refurbished | £225.00 | | K-824 (CONTROL UNIT)-Refurbished | £450.00 | | K-24 (Earlier release than K824) | £400.00 |
Sopho-K Feature Codes Many of our customers already have Sopho-K systems but have lost their User Guides and forgotten some of the most common feature codes. If you don't see the feature you want to activate below just click on the feedback button at the top of this page and let us know what feature you want to use...we'll try to help. Internal Call Pick-Up - If an unattended terminal is being rung by another extension, any extension may answer the call by lifting the handset and keying *8 Call Back on Busy- If you call an extension that is busy, when you hear busy tone simply key *5 and hang up. The called extension's MONITOR LAMP will flash rapidly. When the called extension goes on-hook, your terminal will ring. On going off-hook the called extension will receive internal ringing tone. Call Back ON No Replay- If you call an extension that is not answering, simply key *5, you will hear internal dial tone and then you should replace the handset. The called extension's MONITOR LAMP will flash rapidly. When the called extension goes on-hook, your terminal will ring. On going off-hook the called extension will receive internal ringing tone. INTRUDE- When you dial a busy extension you can key *4. This will give the called extension a burst WARN TONE to let him / her know that you are waiting. If the called extension does not clear down within fifteen seconds you will hear internal dial tone. Simply replace you handset and the call will be treated as a Call Bank on Busy. RESPONDING TO AN INTRUDE- If you are on a conversation and hear the warn tone, you can finish the call and replace the handset. The terminal will then ring...pick it up and you will speak the to person that activated the warn tone. Direct Station Selection allows you to store extension numbers under any spare number store or facility button. You simply lift the handset, wait for internal dial tone, press and hold down the program button, press selected DSS button, key terminal number to be stored, release program button and replace handset. If you want to erase the stored number you press and hold down the PROGRAM button, press the selected DSS button and release the PROGRAM button. LAST NUMBER REDIAL- Press the line button and press the transmit button twice to call the last number dialled. INTERCOM- Any K365 terminal can converse with another K365 by activating the target terminals loudspeaker. Press monitor, wait for internal dial tone, key *3, key extension number and speak towards the terminal. This feature is also available to K260 and K261 terminal but instead of speaking towards the terminal you have to lift the handset. The feature will not work if the target extension is a K160 or has do not disturb or divert activated. PAGING- Extension ten can speak to all extensions in the page group. Simply go off hook, press *1, and make your announcement. All terminals in the group (can be all terminals) will receive a 1 second burst of ringing before the announcement. DIVERT- To divert your calls to another extension, lift handset, Key *2, key nominated extension number, hears special tone, replace handset. To cancel divert, left handset, key #2, replace handset. Conference-To set up a conference, put your external number on exclusive hold, key extension number, speak, press 3...your external party, you and the other extension will all be in conference.
| 
